Large Flush Wood NexGen-Hybrid (Arch)

A tall, wide arched fire for the fireplace at the center of your home. Quick Facts • Heating Capacity: 1,500–2,500 sq ft • Efficiency: 77.8% • Viewing Area: 24 1/2″ wide by 13″ tall, arched (307 sq in). • Maximum Log Size: 24″ • Burn Time: Approx. 11–15 hours • Fuel: Wood. • Fan: Included Who It’s For A big open fireplace is the natural center of a room, but it burns through wood and sends most of the heat outside. You need the same commanding fire, closed in and working for you. The Large Flush Wood Arch is for the homeowner with a generous wood-burning fireplace who wants an arched, traditional look and enough heat for a large living area. Leave the opening as it is and the fire stays a show; add this insert and it becomes the main source of warmth for up to 2,500 square feet. What Makes It Special The view is the draw: 307 square inches of arched glass . Four arched faces, Classic Arch Black, Artisan Charcoal, Boston Charcoal, and Wilmington Black, let you choose a deep black or a softer charcoal frame. The fire behind it is built for long evenings, with up to 15 hours on a load and 77.8% efficiency. Twin fans push warmth out to the far side of the room. A one-piece surround panel in either of two sizes covers the space between insert and masonry, so the finished front looks built in. Possible Downsides • The arched door shows less fire than the rectangular door : 307 square inches versus 319. • Face and surround panel are both required choices. • The push-button igniter is an add-on. Without it, you light the fire by hand. If you want a large arched fire that heats as well as it looks, the Large Flush Wood Arch NexGen-Hybrid is the right decision. Your fireplace becomes the warm center of the house, not just the handsome one. Choose the Classic Arch Black, Artisan Charcoal, Boston Charcoal, or Wilmington Black face, a one-piece surround panel in two sizes, and extras including the push-button igniter, an insert wiring kit, and firewood moisture meters.